News dynamics

EktionSMT production aoi equipment working environment requirements

2018-01-09 19:27

-AOI equipment manufacturers specializing in the design, production, sales and service of mechanical and electrical equipment (AOI, aoi automatic optical detector, aoi visual detector, tin slag reduction machine, SMT peripheral products and motor automatic tester) EktionSMT production aoi equipment is a high-precision mechatronics equipment. Equipment and process materials have certain requirements for environmental cleanliness, humidity and temperature. In order to ensure the normal operation and assembly quality of the equipment, the working environment has the following requirements:

Power supply: power supply voltage and power to meet the equipment requirements

Voltage to be stable, requirements:

Single phase AC220(220±10%,50/60 HZ)

If the three-phase AC380V(220±10%,50/60 HZ) fails to meet the requirements, a regulated power supply shall be configured, and the power of the power supply shall be more than twice the power consumption. Temperature: ambient temperature: 23±3 ℃ is the best. Generally 17~28 ℃. The limit temperature is 15~35 ℃ (the ambient temperature of the printing room is 23±3 ℃ for the best) humidity: relative humidity: 45~35 ℃ ~

Working environment: the workshop shall be kept clean and hygienic, free of dust and corrosive gas.

Air cleanliness level 100000 (BGJ73-84);

In the air-conditioned environment, there must be a certain amount of fresh air, try to control the CO2 content below 1000PPM, and the CO content below 10PPM to ensure human health. Anti-static: The production equipment must be well grounded, and the three-phase five-wire grounding method should be adopted and independently grounded. The floor, table mat and seat of the production site shall meet the anti-static requirements. Exhaust air: both reflow soldering and wave soldering equipment have exhaust air requirements. Lighting: the plant should have good lighting conditions, the ideal illumination is 800LUX × 1200LUX, at least not less than 300LUX.

Requirements for SMT production line personnel: the operators of each equipment in the production line must be qualified through professional technical training and must be proficient in the operating procedures of the equipment.

Operators should strictly follow the "safety technical operation procedures" and process requirements.

Previous Page

Long-term use of AOI automatic optical detector operation is harmless to the human body

EktionAOI Programming Considerations

Next Page

Previous Page

Long-term use of AOI automatic optical detector operation is harmless to the human body

Next Page

EktionAOI Programming Considerations

More news

Ektion:AOI Automated Optical Inspection Machine Test Technology

Ektion:AOI Automated Optical Inspection Machine Test Technology

AOI automatic optical inspection machine test technology AOI is a new type of test technology that has only emerged in recent years, but it has developed rapidly. At present, many manufacturers have introduced AOI test equipment.

2018/01/09

Long-term use of AOI automatic optical detector operation is harmless to the human body

Long-term use of AOI automatic optical detector operation is harmless to the human body

AOI machines have a small amount of radiation. But will not endanger the health of the body. Work in the circuit board company,.

2018/01/09

EktionSMT production aoi equipment working environment requirements

EktionSMT production aoi equipment working environment requirements

AOI equipment manufacturers specializing in the design, production, sales and service of mechanical and electrical equipment (AOI, aoi automatic optical detector, aoi visual detector, tin slag reduction machine, SMT peripheral products and motor automatic tester) EktionSMT production aoi equipment is a high-precision mechatronics equipment, equipment and process materials have certain requirements on environmental cleanliness, humidity and temperature

2018/01/09